2007
Pricing Guide for Hydrographic Dipping
**Dealer inquiries welcome**
Ready to order?
Shotguns:
| Complete Shotguns* | $165.00 |
| Complete Over & Under Shotgun | $180.00 |
| Stock Only | $60.00 |
| Forearm Only | $55.00 |
| Barrel Only - Single | $65.00 |
| Barrel Only - Over & Under | $80.00 |
| Barrel Only - Vented Barrel | $80.00 |
| Receiver Only | $65.00 |
*Note: Complete guns do not include trigger guards, floor plates,
bolts or ram rods. These items can be dipped for an additional $20
each. These items will not be warranted. Please make sure you gun is
fully disassembled before shipping it to us. If there has been tape,
paint or any other adhesion material or rubberized coating applied to the gun, we will
charge a $20 pre-treatment fee for removal.
Rifles:
| Complete Rifle* (barrel, stock) | $165.00 |
| Black Powder Rifle* | $165.00 |
| Rifle Stock Only | $80.00 |
| Rifle Barrel Only | $80.00 |
| AR-15 Rifle (standard parts) | $250.00 |
*Note:
Complete guns do not include trigger guards, floor plates, bolts or
ram rods. These items can be dipped for an additional $20 each.
These items will not be warranted. Please make sure you gun is fully
disassembled before shipping it to us. If there has been tape, paint
or any other adhesion material or rubberized coating applied to the gun, we will charge a
$20 pre-treatment fee for removal.
Pistols:
| Complete Pistol* | Call |
| Contender Pistol Barrel | $60 |
Paintball Guns and
accessories:
| Complete Paintball gun (Proto style or similar) with hopper and tank | $210.00 |
| Paintball gun (Proto style or similar) | $160.00 |
| Complete Paintball Gun (Tippman style rifle or similar) with hopper and tank | $330.00 |
| Stock Only | $60.00 |
| Paintball Rifle (Tippman style or similar) | $280.00 |
| Barrel Only - Single | $50.00 |
| Air Tank | $60.00 |
| Stock Only | $60.00 |
| Hopper | $75.00 |
| Face mask | $75.00 |
All paintball guns must be disassembled prior to shipment.
Gun Accessories:
| Scope Rings and Base | $20.00 |
| Scope (At Owner's Risk/Not Warranted)* | $55.00 |
| Choke Tube | $20.00 |
| Extension Tube | $20.00 |
| Bolt Handle (At Owner's Risk/Not warranted) | $20.00 |
*Note: Scopes will have to be fully submerged in
water and so no warranty will be issued.
Bows & Accessories:
| Complete Bow* (Riser** and Limbs) | $135.00 |
| Deluxe Complete Bow Package* (Riser, limbs, cams, quiver top and stabilizer***) | $200.00 |
| **Riser Only | $75.00 |
| Limbs Only (2) | $75.00 |
| Cams or Wheels | $35.00 |
| Limb Pockets (both) | $30.00 |
| Quiver (top only) | $25.00 |
| Stabilizer | $20.00 |
| Tree Stand (Floor, Seat base, seat bracket) | $125.00 |
*Note: Complete bow is riser and one set of limbs only. All bows must be
disassembled prior to shipment. If a bow comes to us assembled, a
$25 charge will be applied to disassemble it, and it will not be
re-assembled afterwards.
**Newer style risers may need to be double dipped in order to
completely cover the whole riser. This is due to the amount of
"holes" that the riser may have. This process may give the final
product a darker looking finish. ***Stabilizer prices may
vary. Price is for typical simple 6" stabilizer.
Fishing Rods, Blanks and Components:
| Complete Fishing Rod* | $65.00 |
| Fishing Rod Blank* | $45.00 |
| Fly Reel | $35.00 |
| Rod Building Component: Reel seats, cork, handles, fighting butts, etc. |
Prices vary |
All fishing rods and blanks no longer than one piece 7ft can be
dipped. Fly reels must come without fly line and clean of grease,
etc.
Complete fishing rods will be dipped whole, except any cork will be
masked off. Guides may not retain print well. All rods longer than
6.5' may not be fully printing on the butt area (the last 3-6
inches), this is due to the length of the rod and will not affect
the finished product when built up.
Other Items:
Sunglasses/Glasses ------------------------------------ $25 - $45
Cell phone face plate/covers -----------------------$30
Complete Car or truck dash trim----------$225 - $500 depending on how many pieces, size and style.
Dealers: Please contact us at 206-372-9998. We would love to work
with you!
We also dip small automotive parts, cell
phone faceplates, or anything that will fit into our dipping
tank! We have the longest tank on the West Coast, at 8ft long.
We
would love to take on your special project, small or large
quantities or one-offs! Contact us today! Our quality control is
the highest, guaranteed!
Prices subject to change without notice.
Got Questions? View our FAQ page!
